ZOL论坛 > 手机论坛 > 诺基亚论坛 > 0510 凤凰2010.12.008.42304英文破解版刷机软件【2010.04.29发布】
返回列表
签到
手机签到经验翻倍!
快来扫一扫!

0510 凤凰2010.12.008.42304英文破解版刷机软件【2010.04.29发布】

15060浏览 / 1552回复

boffola

boffola

148
精华
1892
帖子

等  级:Lv.8
经  验:46772
  • Z金豆: 15

    千万礼品等你来兑哦~快点击这里兑换吧~

  • 城  市:河南
  • 注  册:2009-03-11
  • 登  录:2018-08-20
发表于 2010-05-20 10:45:44
电梯直达 确定
楼主
詹姆士…邦德 把此帖设为精华,作者+50经验:

更新日志:

Main component versions in the release:【主要组件】
· DK2 Driver Version 07.14.0.25
· Nokia Connectivity Cable USB Driver Version 7.1.27.0
· Flash Update Package 09.050.025
· FLS-x Drivers Version 2.09.28

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2010. 8.4.41526
New Products added
· RM-650, RM-627, RM-648, RM-682【增加新的工厂代码:RM-650, RM-627, RM-648, RM-682】
New features
· Nokia Connectivity Cable USB Driver Version 7.1.27.0
· New Connection manager FUSE replaces old connection manager【增加了新的设备管理工具NOKIA FUSE】
Error Corrections & changes
· WCDMA EVM testing issues with Willtek testers corrected, but SW update to Willtek tester is also required.
· Ambient Light Sensor Calibration version corrected to version 1_3_0_40303
· New Label Printing DLL to correct font and IMEI length problems
· SW package download capabilities for FiRe / online use enhanced
· MCF Upload correction
· Improvements to decrease finalization delay in flashing related events
· RF Final Test improvements for RM-586
· Minor menu Changes

KNOWN ERRORS & LIMITATIONS
· Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
· Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore
· If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong.This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix "Prommer maintenance" is looking for the files from the
correct locetion which is "C:Program FilesCommon FilesNokiaTssFlash". If not, Phoenix will show error "Update via ini – file failed". In this case, select "Update" from that Phoenix "Prommer maintenance" – UI, browse to correct directory and select "fpsxupd.ini" for all other prommers except the FPS-8.
· Some phone models request SIM Lock data to be written in wrong format. You should use special DLL as a workaround for this product software related problem. Please see ASB_MPP_048.pdf"Tucson Add-On Components for SIM Lock versions"
· Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
· FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version is needed to correct this, and it is estimated to be available during 2:nd half of 2010
· Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
· RX-51 flashing does not work when CU-4 is used
· When new version 2010_12_8_42304 with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is
finished.
· Note concerning the installation and use with Administrator and User rights - If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as Administrator, you may not be able to start Phoenix after you log off and try to use Phoenix with User Rights afterwards
· If you experience the above mentioned problem:
- Log on as Administrator
- Deleted Fuse folder and its contents from: C:Documents and SettingsAll UsersApplication DataNokia
- After this Fuse’s connection list will be empty and it can be used directly with guest/admin rights.
- This has to be done only once.
· After you close Phoenix, it may not restart. To rectify this:
- Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC.
· USB选项有变,具体使用方法为:
1.
手机可以开机,以“PC套件模式/诺基亚模式”连接电脑后,凤凰会自动识别出机器的RM,直接下拉选择对应机器RM即可调至首位,此时再点scan product即可
2.如果手机无法开机,则默认NO CONNECTION为首位,保持不变,选择open product,其他根据强刷教程即可;

附件:

本帖隐藏的内容需要回复才可以浏览

评分:+Z金豆 1  已有 1人参与评分

flybazhua

flybazhua


精华

帖子

等  级:Lv.2
经  验:491
发表于 2010-05-20 11:25:50 1楼
bo哥辛苦了!

lhd1015

lhd1015


精华

帖子

等  级:Lv.8
经  验:28712
发表于 2010-05-20 11:28:18 2楼
对 楼主 bo哥 说:
=========================

支持

PC1268

PC1268


精华

帖子

等  级:Lv.8
经  验:38189
发表于 2010-05-20 11:54:00 3楼
支持

mkfe71

mkfe71


精华

帖子

等  级:Lv.3
经  验:1150
发表于 2010-05-20 12:00:53 4楼
辛苦xiexi

renlei2008

renlei2008


精华

帖子

等  级:Lv.9
经  验:94891
发表于 2010-05-20 12:22:02 5楼
好东西,要支持

zhuhanzha

zhuhanzha


精华

帖子

等  级:Lv.4
经  验:1729
发表于 2010-05-20 12:24:59 6楼
辛苦辛苦

jsphoenix

jsphoenix


精华

帖子

等  级:Lv.5
经  验:3825
发表于 2010-05-20 12:33:34 7楼
对 楼主 bo哥 说:
=========================

辛苦了

focheng1

focheng1


精华

帖子

等  级:Lv.11
经  验:327463
发表于 2010-05-20 14:06:08 8楼
欣赏了!

haoren007

haoren007


精华

帖子

等  级:Lv.8
经  验:50299
发表于 2010-05-20 14:45:26 9楼
前排支持Bo哥!

lenovo_jiu_j...

lenovo_jiu_jiu


精华

帖子

等  级:Lv.7
经  验:20055
发表于 2010-05-20 15:17:09 10楼
突然发现M8不用刷机软件就可以刷-0-

ccliutong

ccliutong


精华

帖子

等  级:Lv.8
经  验:41124
发表于 2010-05-20 16:19:00 11楼
对 楼主 bo哥 说:
=========================

梧桐支持好友!

zhangyafei00...

zhangyafei001


精华

帖子

等  级:Lv.5
经  验:3780
发表于 2010-05-20 16:38:47 12楼
凤凰刷机也升级了呀,好呀

ymm1983040

ymm1983040


精华

帖子

等  级:Lv.7
经  验:14833
发表于 2010-05-20 17:40:28 13楼
对 楼主 bo哥 说:
=========================

支持BO哥

xie9062931

xie9062931


精华

帖子

等  级:Lv.1
经  验:194
发表于 2010-05-20 18:24:57 14楼
yuyyytt虎虎

nicolas18

nicolas18


精华

帖子

等  级:Lv.1
经  验:208
发表于 2010-05-20 18:29:30 15楼
好东西,要支持

boss2676

boss2676


精华

帖子

等  级:Lv.2
经  验:281
发表于 2010-05-20 18:52:57 16楼
支持一下 定了

lqbaizxf

lqbaizxf


精华

帖子

等  级:Lv.3
经  验:857
发表于 2010-05-20 19:04:53 17楼
幸苦啦

philips826

philips826


精华

帖子

等  级:Lv.2
经  验:342
发表于 2010-05-20 19:47:20 18楼
突然发现M8不用刷机软件就可以刷-0-

手机论坛·森

手机论坛·森


精华

帖子

等  级:Lv.10
经  验:147121
发表于 2010-05-20 20:03:33 19楼
支持

lanmingyu

lanmingyu


精华

帖子

等  级:Lv.5
经  验:4476
发表于 2010-05-20 20:43:04 20楼
对 楼主 bo哥 说:
=========================

谢谢Bo哥!我的RM247版本能用吗?

评分:+经验 5  已有 1人参与评分

展开
点击查看更多精彩回复>>
去第 确定
支持键盘翻页 ( 左右 ) 
高级模式
论坛精选大家都在看24小时热帖7天热帖大家都在问最新回答

针对ZOL论坛您有任何使用问题和建议 您可以 联系论坛管理员查看帮助  或  给我提意见

快捷回复 APP下载 返回列表